Double cone rotary vacuum dryer is a new type dryer which combines mixing and drying. The condenser, the vacuum pump and the dryer are matched, and the vacuum drying device is composed (if there is no need to recover the solvent). SZG series double cone rotary vacuum dryer is advanced in design, simple in structure, easy to clean, material can be discharged completely. It is easy to operate. It can reduce labor intensity and improve working environment. At the same time, when the container rotates, the material rotates, but the material is not accumulated on the wall, so the heat transfer coefficient is high, the drying rate is large, not only the energy is saved, but the material is even and dry, and the quality is good. Can be widely used in pharmaceutical, chemical, food, fuel and other industries drying of materials. Comply with GMP requirements.
When the oil is heated, the automatic constant temperature control is adopted; the biochemical products and minerals can be dried; the temperature can be between 20~160 degrees Celsius and the temperature is less than 2 DEG C.
High thermal efficiency; more than 2 times higher than the general oven.
Indirect heating; the material will not be contaminated; comply with the requirements of GMP. The equipment maintenance is easy to operate and easy to clean.
SZG series double cone rotary vacuum dryer is suitable for pharmaceutical, food and chemical industries such as powder, granular material of vacuum drying and mixing is especially suitable for the following materials: heat sensitive materials cannot withstand high temperatures; easy oxidation; dangerous materials; solvent to be recovered and toxic gases require very low residual volatile materials; the content of the material requirements; fully mixed material evenly.
SZG double cone rotary vacuum drier is a double conical revolving tank. The tank is heated by steam or hot water in the inner sleeve under the vacuum condition, and the heat is contacted with the wet material through the inner wall of the tank. Water vapor evaporated when wet material absorbs heat; is evacuated through a vacuum pump through a vacuum pump. Because the tank is in a vacuum state, and the rotation of the tank makes the material continuously move up and down, inside and outside, and thus the drying speed of the material is accelerated; the drying efficiency is improved; and the purpose of uniform drying is achieved.