Disc continuous dryer is a kind of high efficiency conduction type continuous drying equipment. The special structure and working principle determines that it has high thermal efficiency, low energy consumption, with the characteristics of small size, simple configuration, convenient operation, good operating environment, the drying operation is widely used in chemical, medicine, pesticide, food, feed, agricultural and sideline products processing industry. In the use of various industries in the practice of high praise. Is the production of manufacturing pressure, vacuum sealed, three types, 1200, 1500, 2200, 3000 and four specifications, A (carbon steel), B (material contact part of the uniform C (stainless steel), on the basis of B, increase the steam pipe, main shaft and bracket for stainless steel cylinder and roof lining stainless steel). Three kinds of materials, drying area of 4 ~ 180m2, a total of several hundred types of products, and can provide the necessary ancillary equipment, can meet the needs of users drying of various materials.
(1) the disc dryer is easy to adjust and strong applicability
1, by adjusting the thickness of the material layer, spindle speed, the number of target arm, target type and size, so that drying process to achieve the best.
2. Each drying tray can be heated or cooled separately through the medium or the cold medium, and the temperature of the material is controlled accurately and easily.
3. The residence time of materials can be adjusted accurately.
4, the flow of material is single, no mixing phenomenon, dry uniform, stable quality, no need to mix.
(two) disc dryer is simple and easy to operate
1, dryer drive, stop operation is very simple.
2, after stopping feeding, transfer material dirt, target leaves can quickly empty the dryer material.
3, through a special large inspection door of the mirror, you can carefully clean and observe the equipment.
(three) the energy consumption of disc dryer is low
1, the material layer is very thin, the spindle speed is low, the material delivery system needs less power, less power consumption.
2, heat conduction drying, high thermal efficiency, low energy consumption.
(four) the operating environment of disc dryer is good, the solvent can be recovered, and the dust emission can meet the requirement
1, pressure type: due to equipment by air flow speed is low, and the humidity in the distribution of primary equipment is low, dust is difficult to float to the top of the device, so the top of the wet exhaust outlet contain almost no dust.
2, sealed type: equipped with solvent recovery device, which can easily recover the organic solvent in the wet gas. Solvent recovery device has the advantages of simple structure, high recovery rate, for the inflammable and explosive, toxic and easy oxidation of materials can be used as a nitrogen gas containing a closed cycle wet, so that the safe operation, especially applicable to flammable, explosive and poisonous materials drying.
3, vacuum type: disc dryer operating in a vacuum state, especially suitable for drying heat sensitive materials.
(five) the disc drier is easy to install and small in occupation
1, dryer whole factory, the whole transport, just lifting in place, installation positioning is very easy.
2, because of the drying, the plate type arrangement, the vertical installation, even if the drying area is very big, the occupation area is also very small.