Congratulations on the XTEP dry chicken production line! According to customer requirements, the company for its custom set of chicken meat production line for semi-automatic production line. The heat source is an oil burning hot blast stove, and the pulverizer is a new type of automatic suction device for a gear disc. The discharging is controlled by a fan, and a bag dust removing structure is adopted. The liquid is added by quantitative automatic dosing device, feeding using automatic feeding screw granulation, mixing machine for high-speed vertical mixing machine, granulating machine using rotary granulating machine, dryer adopts vibration fluidized bed, semi square sieve shaker, material and powder by vacuum conveying material by cone granulator granulation.
The working principle of fuel stove: fuel delivery by the security supply device to the burner, the air into the air supply device and the burner organization fully combust in the combustion chamber, high temperature gas produced can meet the technical requirements of the hot gas in the mixing chamber is mixed with cold air.
Chicken production line special tooth disc crusher working principle: material after high pressure fan sucked into the crushing cavity, through the cross impact hammer high-speed moving and zigzag type fixed knife, make the material screen after the needed mesh discharged into the cyclone by fan automatic control of the material, the material into the dust bin transition; after the bag into the bag filter, the exciter excitation dust into the screw conveyor, the transition into the bin.
The quantitative feeding system is a kind of granular and bulk material conveying, continuous dynamic weighing and control system for equipment materials. In control, can be set in accordance with the feeding rate of accurate feeding, by adjusting the belt speed, automatically adjust the material flow, to maintain the set feeding rate continuously. For conveying materials, and can automatically transfer the amount of material accumulation; in the operation, can be implemented by operating the keyboard instrument, also can through the host computer or process management system DCS complete automatic control system. The electric appliance adopts the import frequency converter to speed up, and has the starting, hand automatic state, the frequency converter start, the malfunction, the Zuo Paopian and the right deviation signal instruction, and can control the three places on the side, the local and the DCS computer.
Screw feeding machine is based on the screw rotation, by the blade role, while the friction between the tube wall and the internal friction material of material gravity, the material and the material, the material with relative sliding form and spiral blade and a feeding tube, tube to move forward in the design and production of mechanical transmission principle material.
Chicken production line of special high speed mixing machine for vertical axis type, composed of pusher blade and high-speed mixing blade two sets of blades, pushing the blade material after continuous turning to high-speed mixing blades, the condensation of material crushing, continuously condensed the material to achieve the ideal effect of mixing, discharging through the cylinder automatically open the valve.
Chicken production line special rotary granulating machine working principle: after passing through the motor belt, gear box and the grinding blade pressing leaf to rotate relative to the material, forced extrusion sieve tube, so as to obtain the desired particle.
Working principle of vibrating fluidized bed drier for chicken stock production line:
1) the material in the material inlet into the machine, after blowing hot air and negative pressure to push the positive pressure, the wind under gravity, the material in the fluidization chamber suspended screen surface, then produce vibration force by the vibration motor, the material slowly continuously to the exit direction.
2) the hot air passes through the influence of the positive and negative pressure of the blower and the fan, and continuously flows up and down, so that the wet material is continuously heated, and the intermediate moisture of the material is gasified into water vapor, and then is quickly discharged by the draft fan.
3) after heating the dried material into the flow chamber to square sieve, through fresh air filtration and purification by cooling into the sieve grading treatment, part of the dust after fan gravity into the cyclone of gas-solid separation, fine particles into the material collecting box.